Product Details:
Payment & Shipping Terms:
|
| Other Name: | Carbon Potentiometer | Power Rating: | 0.1W |
|---|---|---|---|
| Total Resistance: | 100Ω ~ 2.2MΩ | Resistance Tolerance: | ± 10% |
| Resistance Taper: | B | Rotary Life: | 10000 Cycles |
| High Light: | variable resistor potentiometer,carbon type potentiometer |
||
Horizontal mounted PT06 6mm adjustable carbon trimmer potentiometer
Description:
A trimmer potentiometer is a miniature adjustable electrical component. They're designed for "set and forget" applications to "trim" the value of a resistor in order to provide an exact gain, output voltage, or current. Trimmer potentiometers are mounted directly on circuit boards, set with a small screwdriver and designed for few adjustments during operation. They may either be single or multi-turn, with the multi-turn used in applications that require more precise settings. They can also be mounted either vertically or horizontally, depending on the requirements for adjusting the component. In 1952, Marlan Bourns patented the first trimming potentiometer, calling it the "Trimpot".
Mechanical specifications:
| Total rotation angel | The angle is measured by rotating shaft from the end of terminal R1 to the end of terminal R3. | 235°±10° |
| Rotation torque | Rotational torque when turn the shaft :without special provision,rotational speed is 60°/s in ambient temperature 5-35℃ | 0.2-2Ncm |
| Stop torque | The force that shaft transfer from terminal 1 to stop point or terminal 3 to stop point after 10 seconds until be break | >4Ncm |
Electrical specifications:
| Total resistance | 10KΩ |
| Resistance taper | B |
| Total Resistance tolerance | ± 10% |
| Rated power | 0.1W(50 ℃) |
| Residual resistance | Rn≤10KΩ R0≤20Ω 10KΩ 〈Rn R0≤ 0.1%Rn |
| Rotation of noise | ≤3% Rn |
| Electrical rotation angle | 200°±20° |
| Max operating voltage | 50VDC |
Others:
| Rotation life | After 10,000 rotation after the test, the changes impacted no more than ± (15% R +0.5 Ω) rotational noise of not more than 100 mv |
| Terminal strength | After welding (350℃, 3,5 seconds) after the of terminal contacts should be good, no termination loosening of |
| Soldering ability | Dip the terminals into tin tank at 260°C±5°C for 2±0.5 seconds, the soldering area should be more than 90%. |
Resistance SR code table:
| Resistance | Code |
| 100Ω | 101 |
| 500Ω | 501 |
| 1KΩ | 102 |
| 2KΩ | 202 |
| 3.3KΩ | 332 |
| 4.7KΩ | 472 |
| 5KΩ | 502 |
| 10KΩ | 103 |
| 20KΩ | 203 |
| 22KΩ | 223 |
| 47KΩ | 473 |
| 50KΩ | 503 |
| 100KΩ | 104 |
| 200KΩ | 204 |
| 250KΩ | 254 |
| 500KΩ | 504 |
| 1MΩ | 105 |
| 2MΩ | 205 |
| 2.2MΩ | 225 |
Application:
Trimmer potentiometer are common in precision circuitry like A/V components, calibrating instruments and setting the bias current on power amplifiers.
Dimension:
Contact Person: Mr. Roy Zhang
Tel: 86 574 56807757
Fax: 86-574-55844980
