Payment & Shipping Terms:
|Other Name:||Bridge Rectifiers||Mounting Position:||Any|
|Weight:||0.125grams (approx)||Average Forward Current:||0.5A|
|Non-repetitive Peak Current:||30A||Package:||MINI-DIP|
schottky barrier rectifier diode,
surface mount rectifier diode
MB10S 0.5A 1000V single-phase glass passivated bridge rectifiers
Single-phase bridge rectifier is the most frequently-used circuit for electronic dc power supplies. It requires four diodes but the transformer used is not center-tapped and has a maximum voltage of VSM. The full-wave bridge-rectifier is available in three distinct physics forms. The main advantage of this bridge circuit is that it does not require a special centre tapped transformer, thereby reducing its size and cost. The single secondary winding is connected to one side of the diode bridge network and the load to the other side.
• This series is UL listed under the Recognized Component Index, file number E142814
• Ideal for surface mount application
• The plastic material used carries Underwriters Laboratory flammability recognition 94V-0
• Surge overload ratings to 30 amperes
• High temperature soldering guaranteed 265 C/10 seconds at 5 lbs (2.3kg) tension
• Can be used to prevent reverse polarity problem
• Half Wave and Full Wave rectifiers
• Used as a protection device
• Current flow regulators
Maximum Ratings & Thermal Characteristics:
Rating at 25℃ ambient temperature unless otherwise specified, Resistive or Inductive load, 60 Hz.
For Capacitive load derate current by 20%.
|Max.repetitive peak reverse voltage||VRRM||1000||V|
|Max. RMS bridge input voltage||VRMS||700||V|
|Max. DC blocking voltage||VDC||1000||V|
|Max. average forward rectified output current at TA=40℃||IF(AV)||
|Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method)||IFSM||30.0||A|
|Rating for fusing (t<8.3ms)||I2 t||10||A2 sec|
|Typical thermal resistance per element||ReJA||110||℃/W|
|Typical junction capacitance per element||Cj||25||pF|
|Operating junction and storage temperature range||
|-55 to +150||℃|
Rating at 25℃ ambient temperature unless otherwise specified. Resistive or Inductive load, 60Hz.
For Capacitive load derate by 20 %.
|Max. instantaneous forward voltage drop per leg at 0.5A||VF||1.1||V|
Max. DC reverse current at rated TA=25℃
Contact Person: Mr. Roy Zhang
Tel: 86 574 56807757