Payment & Shipping Terms:
|Other Name:||Single Phase Diode Rectifier||Reverse Voltage:||1000V|
|Forward Current:||6.0A||Number Of Elements:||4.0|
|Typical IR:||Less Than 0.1μA||Tjmax.:||150℃|
silicon bridge rectifier,
single phase bridge rectifier
Single-phase silicon bridge rectifier KBU6M 6A 1000V for general purpose
Bridge rectifier circuit is a common part of the electronic power supplies. Many electronic circuits require rectified DC power supply for powering the various electronic basic components from available AC mains supply. We can find this rectifier in a wide variety of electronic AC power devices like home appliances, motor controllers, modulation process, welding applications, etc.
A diode bridge rectifier is a device for converting AC, or alternating current electricity into DC, or direct current. AC electricity goes from positive to negative constantly, whereas DC always flows in the same direction. AC electricity is more efficient to transmit and easier to convert into different voltages, so power is transmitted from the station to your house as AC. However, most appliances need DC current to run. A diode bridge rectifier is the most common type of power supply used to provide this current.
Single-phase bridge rectifier is the most frequently-used circuit for electronic dc power supplies. It requires four diodes but the transformer used is not center-tapped and has a maximum voltage of VSM. The full-wave bridge-rectifier is available in three distinct physics forms. The main advantage of this bridge circuit is that it does not require a special centre tapped transformer, thereby reducing its size and cost. The single secondary winding is connected to one side of the diode bridge network and the load to the other side.
• Surage overload rating-150 amperes peak
• Ideal for printed circuit board
• Reliabe low cost construction utilizing molded plastic technique
• Plastic material has Underwriters Laboratory Flammability Classification 94V-0
• Compliant to RoHS
• Mounting position :Any
• Mounting torgue: 5 In.lb.max.
Maximum ratings and electrical characteristics:
Rating at 25℃ ambient temperature unless otherwise specified. Resistive or inductive load,60HZ.
For capacitive load, derate current by 20%
|Maximum recurrent peak reverse voltage||VRRM||1000||V|
|Maximum RMS bridge input voltage||VRMS||700||V|
|Maximum DC blocking voltage||VDC||1000||V|
|Maximum average forward rectified output current. @Ta=50°C||I(AV)||6.0||A|
|Peak forward surage current 8.3ms single half sine-wave super impossed on rated load(JEDEC method)||IFSM||150||A|
|Maximum forward voltage drop per bridge element at 2.0A/3.0A Peak||VF||1.1||V|
|Maximum reverse current at rated DC blocking voltage per element @Ta=25°C||IR||10.0||uA|
|Maximum reverse current at rated DC blocking voltage per element @Ta=150°C||IR||1.0||mA|
|Operating temperature rangeTJ||TJ||-55~150||℃|
|Storage temperature range TA||TSTG||-55~150||℃|
Contact Person: Mr. Roy Zhang
Tel: 86 574 56807757