Payment & Shipping Terms:
|Other Name:||SMD Terminal Block||Housing:||PA66(UL94V-0)|
|Solder Pin:||Brass, Tin Plated||Color:||Customized|
printed circuit board connector,
pcb terminal connector
4.0mm SMD terminal block substitute for WAGO2060, which used for LED
High precision LED board for board connector, can adapt to full automatic patch machine and high temperature reflow welding technology, contact material with high elastic copper alloy material, life up to more than 1000 times, the maximum can withstand current 9A.
Why you need a terminal block?
• It is low in cost when compared to other types of connectors
• It can be readily designed into products for circuits carrying currents of from a fraction of an ampere up to several hundred amperes at low to moderate frequencies.
• The terminals easily can be re-used in the field, allowing for the replacement of wires or equipment, generally with standard hand tools.
• Screw terminals usually avoid the requirement for a specialized mating connector to be applied to the ends of wires.
Electrical and Mechanical:
|Voltage rating||150V(UL), 250V(IEC)|
|Current rating||7A, 9A|
20 mΩ max
|Wire range||24-18AWG 0.75mm²|
|Soldering temperature||250℃ ±5℃ / 5S|
Terminal blocks selection guide:
The difference between blocks can lead to problems if an incorrect type is used or if it is not connected properly. Follow the advice below:
• Look at the electrical equipment you are working on to see what type of connection it requires; normally you will have either a screw-in or plug-in connection. Screw-in wires are placed inside the terminal block and screwed into position, and they are most common for equipment that does not require high voltage protection. A variation on the screw-in connection is one held in place by a spring mechanism. This connector can reduce the time spent on the job because you simply clip it into place instead of removing and replacing the screw.
A plug-in connection has a male terminal at the end of the wire. This terminal is connected to the female port on the terminal block and forms a secure connection. Plug-in blocks are commonly used in the fuse boxes of automobiles.
• Once you know the type of connection that is required, you need to find a terminal block that fits the rest of your requirements. Consider what space you have for the connection and how many wires need to be connected. Terminal blocks are supplied in a variety of shapes and sizes, so you should be able to find one that suits your needs.
• Choose the correct rating. 3A, 5A, 15A, or 30A terminal blocks are widely available, and you'll want to buy the one that meets the highest current level that it will conduct in order to allow the most powerful piece of equipment to function.